background image

i

©

1999 Directed Electronics, Inc.

Limited Lifetime   

Consumer Warranty

Directed Electronics, Inc. ("DEI

®

") promises to the original purchaser to repair or

replace with a comparable reconditioned model any DEI unit (hereafter the "unit"),
excluding without limitation the siren, the remote transmitters, the associated sen-
sors and accessories, which proves to be defective in workmanship or material under
reasonable use during the lifetime of the vehicle provided the following conditions
are met: the unit was professionally installed and serviced by an authorized DEI deal-
er; the unit will be professionally reinstalled in the vehicle in which it was original-
ly installed by an authorized DEI dealer; and the unit is returned to DEI, shipping
prepaid with a legible copy of the bill of sale or other dated proof of purchase bear-
ing the following information: consumer's name, telephone number and address; the
authorized dealers name, telephone number and address; complete product descrip-
tion, including accessories; the year, make and model of the vehicle; vehicle license
number and vehicle identification number. All components other than the unit,
including without limitation the siren, the remote transmitters and the associated
sensors and accessories, carry a one-year warranty from the date of purchase of the
same. This warranty is non-transferable and is automatically void if: the original pur-
chaser has not completed the warranty card and mailed it within ten (10) days of the
date of purchase to the address listed on the card; the unit's date code or serial num-
ber is defaced, missing or altered; the unit has been modified or used in a manner
contrary to its intended purpose; the unit has been damaged by accident, unreason-
able use, neglect, improper service, installation or other causes not arising out of
defects in materials or construction. The warranty does not cover damage to the unit
caused by installation or removal of the unit. DEI, in its sole discretion, will deter-
mine what constitutes excessive damage and may refuse the return of any unit with
excessive damage. 

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES,

INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WAR-
RANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRAN-
TY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUD-
ED; AND DEI NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO
ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS
PRODUCTS. DEI DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL
ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.
DEI SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSI-
BLE THEFT. DEI IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VAN-
DALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND
HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITH-
OUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WAR-

Summary of Contents for 650 ESP









































Reviews: