Directed Electronics 650 ESP, Owner'S Manual

Page: 22 / 40

18
©
1999 Directed Electronics, Inc.
Owner Recognition
Owner Recognition is a feature available exclusively from DEI ® .
Using a DEI ® Bitwriter, hand-held programming tool, your dealer
can program many of the system settings. The programmer makes
it possible to program different settings for each transmitter that
is used with the system. Then, whenever a specific transmitter is
used, the system will recall the settings assigned to that trans-
mitter. Owner Recognition lets up to four users of the system have
different settings that meet their specific needs. It is almost like
having four separate alarms in your vehicle, one for each user.
NOTE: Owner Recognition cannot be programmed without a Bitwriter and
the necessary software. Check with your dealer for more information.
Rapid Resume Logic
This DEI ® system will store its current state to non-volatile mem-
ory. If power is lost and then reconnected the system will recall
the stored state from memory. This means if the unit is in Valet ®
Mode and the battery is disconnected for any reason, such as ser-
vicing the car, when the battery is reconnected the unit will still
be in Valet Mode. This applies to all states of the system includ-
ing arm, disarm, VRS ® , and Valet Mode.