19
© 2008 Directed Electronics - All rights reserved.
➢
Table of zones
The zone number is the number of LED flashes used by the system
to identify that input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or
switches you have had installed.
Zone - Number
Dealer-Installed
of LED Flashes
Description
Options
1
Instant trigger - often used
for hood/trunk pinswitches
2
Instant trigger - a heavier impact
detected by the shock sensor
3
Door switch trigger
4
Instant trigger - for optional sensors
5
Ignition trigger
➢
Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notifcation when arming
or a Tamper Alert notifcation when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks
by the LED.
Example:
If zone 3 was active or triggered, the LED will blink
three times with a two-second pause. Then it will blink three times
again, and repeat until the ignition is turned on.
Your system stores the last two triggered zones in memory. If your
system has been triggered but the LED has been reset by turning
on the ignition, your dealer can still recall the last two zones that
were triggered. Contact your dealer for details
Summary of Contents for 460MAX
Page 1: ...460MAX Owner s Guide...
Page 2: ......
