Model #820041
[ Transmitter Functions ]
Arming the system
You can activate, or arm, the system by pressing on your transmitter for
one second. When the system arms, you will hear a short siren sound, or
chirp, and the brake light will flash once (If installed).
Disarming the system
To disarm the system press . You will hear two chirps, and the brake light
will flash twice (If installed). If the siren chirps either four or five times when
disarming, that means that the security system has been trigger while you
were away.
High Security Disarm
This security system offers High Security Disarm. High Security Disarm is a
feature that makes it possible to silence and reset the system while it is trig-
gering , without disarming the system. If the system is triggered and the
siren has been sounding for longer than six seconds, pressing on the
transmitter will stop the trigger and return the unit to the arm state. The
system will not disarm but rather reset. This prevents you from disabling the
system should you wish to disarm it without visually checking the vehicle.
Pressing , after resetting the system, will disarm the system; pressing
this button during the first 5 seconds of the triggered sequence will disarm
the security system immediately.
NOTE:
On some motorcycle, it is also possible to get a brake light flash when arming and disarming, along
when in full trigger. However in some cases, connecting the security system to the brake light may damage
the brake light circuit.
2002 Directed Electronics, (Canada). Inc.
3
