Multi-Level Arming
Multi-Level security arming allows you to select which of the security system’s inputs or
sensors will be active and which will be bypassed at the time that the system is armed.
Pressing again within five seconds of arming the security system will activate the
Multi-Level security arming feature.
Press
one time:
The siren will chirp once.
(The security system is armed)
Press
a secoind time within 5 seconds :
The siren chirps twice followed by a long chirp
(The Tilt /Motion sensor is bypass (optionnal on
motorcycle))
Press
a third time within 5 seconds :
The siren will chirps 3 time followed by a long
chirp
(The shock sensor is bypass (optionnal on ATV and
snowmobile))
Press
a fourth time within 5 seconds :
The siren chirps 4 times followed by a long chirp
(The shock sensor and the Tilt/Motion sensor are now both
bypass( only if both sensor are installed))
Press
a fifth time within 5 seconds :
The siren chirps 5 times followed by a long chirp
(All inputs zones, except the ignition, are now bypassed)
Continued pressing of
will begin multi-level security arming cycle over again :
The siren will give a long chirp
(The security Level Security Arming is back to square one)
NOTE :
Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed
and then re-armed, all the zones will be active again
6
2002 Directed Electronics, (Canada). Inc.
