10
©
1999 Directed Electronics, Inc.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down
the engine if the system receives any of the following shut-down
inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the ON position.
■
The pre-programmed run time has elapsed.
■
Buttons
and
are pressed again.
To shut down the remote start and turn off the engine:
■
Step on the brake pedal, or
■
Press
and
for one second.
Timer Mode automatically starts the engine and runs it for a pre-
programmed time period, every three hours for a total of six oper-
ation cycles. This feature helps to ensure that your engine will
start in the morning after a night of extremely cold temperatures.
IMPORTANT!
This feature must only be used in open areas, never in an
enclosed area such as a garage.
To enter Timer Mode:
1.
Start the vehicle by pressing and releasing
and
.
2.
Press and release
.
3.
Within two seconds press and release
and
again.
Timer Mode
