10
7.
Repeat steps 1 through 6 to set up a new component
under
AV2
(or
AV1
).
8.
For future reference write down the working code for
the component(s) set up under
AV1
and
AV2
below:
AV1:
COMPONENT:
___________________
AV2:
COMPONENT:
___________________
SEARCHING FOR TV, AV1 OR AV2 CODES
If you were unable to find the code for your brand of TV or
component, you can try a code search. This process may
take up to 30 minutes.
1.
Turn on the TV or component. Insert a tape or disk if
applicable.
2.
Slide the
MODE
switch to the
TV
,
AV1
or
AV2
position,
as desired.
3.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light under the selected switch
position flashes twice, then release both keys.
4.
Enter
9-9-1
followed by one of the following four-
digits:
5.
Press
PWR
, or other functions (e.g.
PLAY
for VCR) you
want to use.
6.
Point the remote at the TV or component and press
CHAN
S
. Repeatedly press
CHAN
S
until the TV or
component turns off or performs the action you
selected in step 5.
NOTE:
Every time
CHAN
S
is pressed the remote
advances to the next code and power is trans-
mitted to the component.
COMPONENT TYPE
COMPONENT ID #
Satellite
0
TV
1
VCR/DVD/PVR
2
Stereo
3
