26
CAUTION:
If improperly performed, equipment
or property damage or resident injury is possible
during maintenance.
Notice To Maintenance Staff
• Carry out all adjustment and cleaning
procedures specified.
• Assembly of this bed and modifications made
during the actual service life require evaluation
to the requirements of IEC 60601-1 and IEC
60601-2-52.
• Before using, always check function of the bed
and all accessories.
Cleaning Instructions
• If possible, remove resident before cleaning bed.
• Prior to cleaning
, unplug power supply cords.
• Ensure all electrical parts (motors, control boxes,
wires and pendant) are not broken. Ensure NO
liquids enter electrical components.
• Remove all gross/solid contaminants, then wash
and sanitize all components. DO NOT submerge
the bed frame or electrical components.
• Solvents, alcohol, bleach, caustic agents, high acid
or alkaline solutions, or petroleum-based products
should not be used on the bed.
• Use standard water pressure. DO NOT power
wash or steam clean any parts.
• Rinse completely with water (Maximum
temperature 110
o
F or 43
o
C). Do not rinse with
cold water.
• Ensure all parts are dry before using or storing.
NOTE:
This bed is NOT compatible with wash
down tunnels.
Care and Maintenance
(cont.)
