background image

GUARANTEE

This 

 product carries a Screwfix Direct Ltd guarantee of 12 months. If your 

product  develops  a  fault  within  this  period,  you  should,in  the  first  instance  contact 

Screwfix Direct Ltd on Freephone 0500 41 41 41.  If the fault occurs within the first 12 

months, you may return the goods for a full refund or we will repair or replace the goods 

if you prefer. When repair is not practical or identical goods are not available, alternative 

goods of similar specification and quality will usually be provided but, failing this, you 

will be offered a partial or full refund depending on the time period since purchase. 

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

- Repairs attempted by anyone, unless authorised by Screwfix Direct Ltd.

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

For further technical advice, spare parts or repair service (outside of guarantee) please 

contact the customer helpline number on 0845 607 6380.

Congratulations on your purchase of a 

 power tool from Screwfix 

Direct  Ltd. We  want  you  to  continue  getting  the  best  performance  from  it 

so this handbook includes information on safety, handling and care. Please 

retain this handbook in case you need to refer to any of the information in 

the future.

Your 

 power tool comes with a 12-month guarantee,so should it 

develop a fault within this period contact Screwfix Direct Ltd on Freephone 

0500 41 41 41.  

Summary of Contents for BH26S3

















Reviews: