5kg SDS Plus Rotary Hammer Drill BH26S3
OPERATION INSTRUCTIONS
1. GENERAL DESCRIPTION
This ROTARY HAMMER DRILL can be used
for drilling masonry. contained in the case is
a selection of larger masonry bits and chisels.
These fi t directly into the rotary hammer. Using
the hammer setting the supplied chisels can be
used to break brick work. The machine uses a
single phase alternating current 230V, 50Hz motor,
its compact and robust format makes it versatile
and effi cient for uses described in specifi c safety
instructions. It complies to current regulations
and the optimum quality of materials used will
ensure a long working life in complete safety.
2. OPERATING INSTRUCTION
Familiarize yourself with the rotary hammer drill
before use.
Note:
Make sure the hammer is isolated from the
mains supply before fi tting accessories. Before
undertaking any maintenance or operations on
the rotary hammer detach the plug from the
mains socket.
3. FITTING THE AUXILIARY HANDLE
Attached the handle as shown in Fig 2 depending
on being left handed or right handed.
4. FITTING SDS TOOLS
The drill is equipped with an SDS-plus attachment
system. The SDS tools have slots in the shank.
These locate with tabs in the rotary hammer.
Hold the rotary hammer with one hand facing
away from yourself. See Fig 3.
Grip and pull back the fastening sleeve and insert
the SDS tool.
Push inwards until a resistance is felt. It may be
necessary to spin the SDS tool until the shaft
drops completely into place.
Once you are satisfi ed it has seated release the
black fastening sleeve. This should lock the SDS
tool into position.
5. REMOVE SDS TOOL
Pull back fastening sleeve, hold and remove tool.
See Fig 3.
Note:
The SDS tools will be gripped fi rmly by its
shank and will not be able to be removed.
Loosen the handle
Fig 2
Fig 5
Fig 3
Fig 4