PP8 Plus
14
IN50001 Rev. C 04/30/2008
Motors and all electrical components are not sealed against the weather and moisture. Install
this lift in a protected indoor location. Failure by the owner to provide the recommended
shelter could result in unsatisfactory lift performance, property damage, or personal injury.
OPERATION INSTRUCTIONS
NOTE: ALWAYS CHOCK WHEELS AND SET PARKING BRAKE BEFORE LIFTING
VEHICLE!
Only authorized personnel are to operate lift. Read Operating and safety procedures
Manual completely before operating lift.
•
Properly maintain and inspect lift in accordance to owner' manual.
•
Do not operate a lift that is damaged or in need of repair.
•
Allow only authorized personnel in the lift bay.
•
Stay clear of lift when raising or lowering (no riders).
•
Keep hands and feet away from pinch points at all times.
•
Never override the lift operating and safety controls.
•
If a vehicle is suspected of falling, clear area immediately.
•
Do not rock vehicle while positioned on lift.
•
Always use safety jack stands when removing or installing heavy components.
Vehicle Loading:
•
Position vehicle on lift runways by having another person guide you onto the runways.
Check for proper weight distribution (center of gravity should be evenly distributed
between columns).
•
Set vehicle parking brake and chock tires to prevent vehicle movement.
•
Use caution before lifting pickup trucks, suv's and other vehicles. The individual axle
weight capacity should not exceed 1/2 of lift capacity.
•
Make sure vehicle is neither front nor rear heavy.
Raising Lift:
•
Push up switch to raise lift until platform runways clear floor.
•
Stop and check for vehicle movement and vehicle weight distribution. If secure raise
to desired height.
•
Always lower the lift to the nearest lock position by pressing the lower lever to relieve
the hydraulic pressure and let the latch set tight in a lock position.
•
Never work under a lift that is not in the locked position.
Lowering Lift:
•
Clear all obstacles from under lift and vehicle, and ensure only lift operator is in the lift
area.
•
Stay clear of lift and raise the lift off the safety locks.
•
Pull safety latch releases and press the lower lever to begin descent.
•
Ensure lift is fully lowered, and having another person guide you, carefully unload the
lift by driving off of the lift runways.
CAUTION
PAY ATTENTION TO THE LOWERING SPEED OF ALL FOUR CORNERS. MAKE SURE
