Direct IP IDIS DP-HE1201, User Manual, Page: 31 / 44

Part2 - Remote Setup
31
Motion Detection
Select Motion Detection to configure motion detection
event settings. With motion detection event enabled,
motion detections within the designated area will be
assumed as events.
• Sensitivity : Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
• Minimum Blocks for Detection : Select minimum
blocks for daytime and nighttime motion detection.
Motion must take place over the selected number
of blocks in order for it to be considered as a motion
detection event.
• Motion Zone : Click Setup and define the motion
zone using blocks.
- (Select)/ (Unselect) : Enable/disable motion
detection.
- (Single Block) : Select/unselect motion detection
blocks individually.
- (Zone) : Select/unselect multiple motion
detection blocks.
- (All) : Select/unselect all motion detection blocks
• Motion Ignoring Interval : With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Daytime : Specify when daytime starts and ends. All
other times will be assumed as nighttime.
• Event Action : Select a motion detection event alert
action.
- Send Email : Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback : Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- FTP Upload : Select this option if you wish to
upload images to the FTP server.
Event Action settings must be configured correctly
in order to perform event actions.