Direct IP Idis DD-1216, Operation Manual

Page: 21 / 68

21
Part 3 - Configuration
Mouse
Using a mouse makes it easy to configure the settings. A
mouse lets you make selections faster and use its wheel to
scroll through long menus. You can also use the mouse wheel
to increase/decrease numerical values.
System Setup
Refer to the Menu Use on page 20 for basic information on
using the Setup menus.
General
This Setup menu contains general system options.
• Site
: Used to enter a description about the system’s
installation site (no description by default). You can edit the
information using the virtual keyboard.
• Language : Choose a language.
• Version : Indicates the software version.
•
Upgrade
: Select to upgrade the system. Selecting Upgrade
displays the USB search window. You will then be able to
select an upgrade package and upgrade the system. Once the
upgrade is complete, the device will reboot automatically.
If an upgrade attempt fails, an upgrade failure message
will be displayed. Refer to
Error Code Types on page
30 for more details.
• Setup : Exports current video decoder settings or imports
existing settings.
• Import : Imports the current system settings to a storage
device connected to the system’s USB port.
Selecting
Setup Import
does not change the settings
below.
• Time-related settings (Date/Time, Time Zone, and Use
Daylight Saving Time)
• Export : Exports the current system settings to a storage
device connected to the system’s USB port. You can designate
a
File Name for the export file.
For USB flash memory devices, the video decoder supports
the FAT32 file format only.
• Show System Log
: Displays a searchable list of 5,000 most
recent system log entries. For more information on types of
system log entries, refer to the
System Log Types on page
29 . To export the system log, select the Export at the
bottom of the screen and then designate a file name.
In order to display the system_log.txt file, you must
use the correct character encoding settings and use a
fixed-width font.
• Registration Device : Select the device type option to
search for cameras. There are two ways to search for the
cameras that you want to register:
-
NVR
: Scans NVR to search for cameras connected to
the NVR.
- Cameras : Searches for cameras using the IDIS protocol.
In this case, the cameras must support the IDIS
protocol.
If you change the Scan settings, the registered NVR or
cameras will be disconnected.
• System Shutdown : Shuts down the system. When
prompted, select
System Shutdown
.
The system will restart after changing the channel mode.