27
EN
Steckplatz durch den GAIN control,
right in the center of the field of view.
• Now switch to CORRECT 2 mode (green
square) and drag the green square to the
centre of your daylight optics marker by
turning the GAIN knob.
• Finally, save the settings by briefly
pressing the SAVE button.
Ideally, the next time you've clamped
your Monocular to your daytime optics,
the red square with the four menu boxes
should be in the middle. If this is not the
case, try to bring it there by loosening
the adapter lock slightly and moving the
monocular slightly. Once the square is
exactly in the middle, tighten your
adapter clamp properly.
ACCESSORIES
It is possible to connect the device to the
car socket with a special cable or to
connect it with the external power
source with the output voltage of 8-14.5
V via JACK 2.1 cable
Summary of Contents for TFA1000
Page 36: ...36...