21
EN
Turn the GAIN knob (4) to point the
flashing dot at the defective pixel (to
switch from the x-axis to the y-axis, press
GAIN control (4) briefly) and restore the
defective pixel by pressing the SAVE
button (9). If you have another bad pixel,
repeat the steps. If you want to exit the
correction mode, press and hold the
Press SAVE (9). You can now either
switch off the device completely or leave
the correction mode by selecting EXIT.
This can be achieved by briefly pressing
or turning the GAIN control (4).
Profiles:
You can use different settings of the
device with different daytime optical
devices. For more information, please
contact the seller or dealer.
Language:
To change the language (English /
Russian), press and hold the INVERT (8)
button and turn on the unit.
Reset settings:
To reset the settings to the default
settings, hold down the GAIN (4) +
INVERT Button
Summary of Contents for TFA1000
Page 36: ...36...