Dipol TFA1000, Manual, Page: 19 / 36

19
EN
Adjustment of sensor amplification
and image brightness:
Briefly press the GAIN button (4). In the
center of the display appears a square
devided in four sections with settings
GN / BR / SN / DE.
To select/change the setting, briefly
press GAIN control (4) again and again
until the required setting blinks. Now
turn the same GAIN control (4) to select a
suitable setting value.
All settings can also be made via the
main menu you reach by pressing the
SAVE button (9) shortly. Now you can
switch between the four setting by
pressing GAIN control (4) and change
their values by turning it.
Pixel correction:
To remove defective pixels, enter the
correction mode by pressing and and
holding the SAVE button (9) for 3-6
seconds. A crosshair with a flashing dot
in the middle and the following symbols
for correction appears:
Х Y Save Exit