INSTRUCTIONS FOR USE DA 270, DA 370, DA 280, DA 380
UM_EN_DA270_DA280_DA370_DA380_m2015_2019-04_ver1.9 37 / 67
Button for the working mode of the motor.
Two working modes are available: ENDODONCY, PREPARATION. In accordance with the chosen mode,
the individual items of the setting of the motor parameters are made accessible. Press the button repeatedly
to alternate between the two modes.
Mode PREPARATION enables only the normal mode at maximum torque.
Mode ENDODONCY enables all modes
– NORMAL/AREV/AFWD. The button is active only if the instrument is at rest.
Button for setting the amount of cooling water.
Press the button to start the setting mode in which the buttons whose values can be changed are
displayed in red. Change the parameter value by means of the buttons +/- . The new value is saved
temporarily (until the change of the program number) by pressing the button of the parameter being set
again or permanently into the program by means of the button
. The new value can be entered also directly via
numerical keyboard after pressing the button
. The button is active only if the instrument cooling is turned ON
Button to turn the instrument light on / off.
Press the button to turn the instrument illumination on -
/ off -
If the instrument allows switching two colors of the light (white / blue UV), then
•
Quick pressing of the button (time < 1 second) switches color of the light
/
and
•
Longer pressing of the button (time >= 1 second) turns the instrument light ON / OFF
Button to turn the instrument afterblow on / off .
Press the button to turn the instrument afterblow on -
/ off -
.
The buttom is active only if the cooling is turned on.
Button to change the direction of the motor rotation.
Press the button to change the direction of the motor rotation -
.
The button is active only at the rest
position of the lever / pedal of the foot controller.
Changing working mode of the foot controller lever/pedal
The button is active only if the output control mode is enabled and if the instrument is at rest.
➢
Lever/Pedal in discrete (jump) mode
It indicates discrete mode of the pedal, i.e. after pressing the foot controller pedal / lever, the controlled
power jumps to maximum value and does not change any more with the pedal position.
By pressing this button, you can switch to the second mode:
➢
Lever/Pedal in analogue (linear) mode
After pressing the foot controller pedal / lever, the controlled power increases proportionally according to
the deviation of the foot controller pedal / lever up to the maximum value (at the full deviation of the foot
controller pedal / lever). By pressing this button, you can switch to the previous mode.
Button to turn the instrument cooling on / off.
Press the button briefly to turn the set type of the cooling of the instrument on / off.
By pressing and holding the
button for ca 2 se
conds a „pop-up menu “ is displayed with the following options:
Press the respective button to select the desired type of the cooling - water /
, or
spray /
, or cancel the instrument cooling type by pressing the button
„ESC“. To save the changed type of the
instrument cooling permanently into the memory, first press the button of saving into the memory
. The new
condition of saving the data into memory is indicated by change in the colour of the icon
. This condition can be
cancelled by pressing the button again.
DR.2
ESC
