ca.diono.com/welcome
1-866-954-9786
42
43
FOR
W
ARD F
A
CING
INSTALL USING UAS: 10-29.5 kg (22-65 lbs)
1. Remove UAS Strap from Storage Location on back
of seat
.
Fold down cover on back of car seat. Locate the UAS
Strap in the belt storage location shown. Push in on
the red buttons on the UAS connectors and remove
from storage position
1
.
Lift the bottom bar up and over the inside channel
toward the seat bottom to release. Confirm locked.
Make sure UAS strap or vehicle seat belt is
routed through the forward-facing belt path marked
with the red label and forward-facing illustrations.
Install this car seat tightly in your vehicle. The car
seat should not move at the forward-facing belt path
location by more than 2.5cm (1") from side to side,
front to back. If using a lap belt only, refer to your
vehicles owners manual for installation advice.
Harness straps MUST be above the top of your
child’s shoulders. The chest clip should be placed at
armpit level.
FOR
W
ARD F
A
CING
