ca.diono.com/welcome
1-866-954-9786
44
45
4. Place UAS in Forward-facing
belt path.
Unzip the pocket to the right side
of the UAS storage area, this will
allow you to move the UAS
connectors down to the forward
facing belt path. Feed UAS
anchors as shown; once
completed – close the zip pocket.
5. Place Car Seat Forward-Facing
in Back Seat of the Vehicle
Place forward-facing in
vehicle seat and centre the car
seat between the lower UAS
anchors. The base should sit flat on
the vehicle seat.
6. Loosely Attach Top Tether Strap
Do not tighten. Consult vehicle’s
owner manual for specific location.
FOR
W
ARD F
A
CING
2. Extend the UAS Strap.
For easier installation, extend the
UAS strap to its maximum length
by pressing the grey button and
pulling on the strap.
3. Unhook and Remove Top Tether
Strap from Storage Location on
back of seat.
Look for the Top Tether location
2
.
FOR
W
ARD F
A
CING