diono.com
Everett NXT
22
23
ADJUSTING THE HEAD SUPPORT
The head support height can be
adjusted for best fit to your child and to
ensure proper placement of the vehicle
shoulder belt.
WARNING!
Adjust the head support
height before fitting the child in the
vehicle seat.
1. Turn the head support locks
outwards to unlock the head
support.
2. Grip the handle adjustment and pull
it out and upwards to adjust the
head support.
3. Adjust head support to proper
height:
The
RED
shoulder belt guide
should be slightly above the child’s
shoulders (at least 1 cm).
4. When it reaches the desired height,
release the handle and
turn the
head support locks inward to
lock it fully into position.
WARNING!
Use ONLY the lap and shoulder belt system
when restraining the child in this booster seat.
DO NOT
use
lap belt only.
1. Properly position child into
installed seat.
Child should be sitting
upright and seated all the way back
in the booster seat.
2. Feed the diagonal portion of the
vehicle seat belt through the
RED
shoulder belt guide
.
3. Fasten vehicle seat belt across
child.
The lap portion of the seat
belt should rest within both lower
belt guides. Make sure the vehicle
seat belt is not twisted and lays flat
across child’s lap, torso and
shoulder.
SECURING THE CHILD
1
1cm
2
1
2
4
SECURING THE CHILD
3
3
click
