2 OF 6
IG051418-1.0
ETERNALUX
™
LED Light Bar
INSTALLATION GUIDE
ETERNALUX
™
LED LIGHT BAR
INSTALLATION GUIDE
INSTALLATION
TURN POWER OFF AT CIRCUIT
BREAKER
SHOCK HAZARD!
May result in serious
injury or death.
Turn power OFF at circuit breaker prior to
installation
.
REQUIRED TOOLS
1
2
3
1. Phillips-head Screwdriver
2. Ruler (Recommended)
3. Wire Stripper (Recommended)
4. (2) Mounting Clips per 12”.
5. (1) Screw per Mounting Clip
DETERMINE LOCATION TO INSTALL
COMPONENTS
1
3
2
Refer to
SYSTEM DIAGRAMS
1) Class 2 Driver
2) Control
3) Eternalux
WIRE GAUGE & VOLTAGE DROP
Ensure applicable wire is installed between driver, fixture,
and any controls in between. When choosing wire, factor in
voltage drop, amperage rating, and type (in-wall rated, wet
location rated, etc.)
TEST CONNECTION
Prior to mounting, attach to Class 2 LED
Driver, turn on power and test connection to
ensure system is operating properly. Turn off
power again before mounting.
4
5
