PAGE 2
(314) 205-3033
www.diodEdynAmics.com
4. Using the alignment tabs, reinstall the reflector
housing into main headlamp housing, running the
wiring through the dust cap and resealing any holes
that you may create. Replace the lense and repeat for
other headlamp.
7. After testing, reseal the light.
Repeat on other side.
8. Enjoy! Follow instructions for
remote control to change color as
desired.
Please contact
diode dynamics
should you have any questions about the installation
or wiring process, at
314-205-3033
(9a-5p CST) or
2013-2014 Ford mustang
RGBw
Tm
LEd Board installation Guide
scan the QR code to link to our installation video online!
NEED mORE HElp?
We’ve taken the time to test our products on your vehicle. We can
guarantee compatibility and fitment the first time – no guessing
game! If you need more help with installation, watch our step-by-step
video to walk you through the process.
5. Connect the LED board to the RGBW Driver and then connect the bare wire leads to the
remote controller (sold separately). These modules can be used with any RGB or RGBW
controller that operates with common anode (positive). See diagram above.
6. Connect remote control power to the Dual Input Module. Next, tap the Dual Input
Module wires to any 12V power source. In the table below, we have listed the suggested
wires to tap.
wiring instructions
