DINWAY BAM8 Series, Instruction Manual

Page: 4 / 18

B- B- B- B-4 4 4 4
3. 3. 3. 3. Type Type Type Type Designation Designation Designation Designation
BA M
8
- □ □ □ / □ □ □ □
Type of N-pole for 4-P breaker*
Application: Blank: for power distribution;
2: for motor protection
Release type and accessory code
Number of poles
Operation mode: Blank: direct operation with handle;
P: motor-driven operation;
Z: Operation with rotary handle
Code of breaking capacity: S-standard type;
H-higher class type
R-current limiting type
Frame size rated current
Design sequence number
MCCB code
Company code
Note *: There are 4 type of N-pole for 4P breaker
� Without current release components, N-Pole is always at making status, not makes and breaks with other three poles;
�
Without current release components, N-Pole makes with other three poles (N-pole first makes then breaks);
�
With current release components, N-Pole makes and breaks with other three poles (N-pole first makes then breaks);
�
With current release components, N-Pole is always at making status, not makes and breaks with other three poles;
Table 1. Release mode and Accessory code
Accessory Release mode
Accessory designation
Instantaneous
release
Compound release
No accessory 200 300
Alarm contact 208 308
Shunt release 210 310
Auxiliary contact 220 320
Under-voltage release 230 330
Shunt release, auxiliary contact 240 340
Shunt release, under-voltage release 250 350
Two sets of auxiliary contact 260 360