Modify WiFi Settings
9
WiFi is enabled by default. Go to "network
→
WLAN" page to turn off the wireless or modify relevant parameters.
The default SSID of the device is "domain"_ [last six digits of MAC address] “. Except default SSID, users can create three
more SSIDs.
After modifying the WLAN parameters, you need to click "apply" to make the settings take effect.
Create SIP Extensions
10
On the Extension
→
SIP interface, you can configure the SIP accounts registered in the UC100 by SIP clients ( hereby
UC100 is regarded as a SIP server ).
If the status of new added SIP account is "enabled", it means that the UC100 accepts the registration of the extension.
if the status of the SIP account is "disabled", it means that the UC100 rejected to register the extension. Up to 32 SIP
accounts can be configured.
The registration status of SIP extension and SIP trunk can be checked on the "status
→
SIP" page.
After setting, you need to click "apply" to make the settings take effect.
The default network mode of UC100 is router mode, and it can be set to bridge mode. In router mode, the IP address of WAN
port and LAN port should be in different network segments. The default IP address of WAN port is obtained by DHCP, while
the default IP address of LAN port is 192.168.11.1. In bridge mode, WAN port and LAN port use the same IP address.
After modification, you need to click "apply" to make the settings take effect