Installation Instruction
5
• UC100-1V1S1O
Install WiFi antenna (foldable antenna) on the left and
right sides, and install LTE antenna (flat paddle antenna)
on the rear panel.
Antenna Installation
• Router mode
• Bridge mode
Connect the power adapter to power jack (All models).
Insert SIM card to SIM slot (UC100-1V1S1O
/1G1S1O/1G1S).
Connect network cable to WAN and LAN (All models)
Connect analog phone to FXS or connect landline to
FXO (All models).
DC12V WAN LAN0 LAN1 LAN2 FXS FXO
RST
WPS
Router/Switch
TCP/IP
192.168.11.XXX
192.168.11.1
Network cable
192.168.1. XXX
Network cable
Switch
Different IP segments
PC
DC12V WAN LAN0 LAN1 LAN2 FXS FXO
RST
WPS
Router/Switch
TCP/IP
192.168.11.XXX
192.168.11.1
Network cable
Network cable
Switch
PC
The same IP segment
WiFi Antenna
WiFi
FXS
LAN1
WAN
PWR
SIM
SIM
LAN2
LAN0
FXO
RUN
LTE Antenna
U C 100
D IN STAR
• UC100-1G1S1O/1G1S
Install WiFi antenna (foldable antenna) on the left and
right sides, and install GSM antenna on the rear panel.
• UC100-1S1O/1S/2O
Install WiFi antenna on the rear panel of the device.
UC100 supports router mode and bridge mode.
The above figure shows the network connection in router
mode. In router mode, the default IP of WAN port is DHCP,
and the default IP of LAN port is 192.168.11.1.
The above figure shows the network connection in bridge
mode. In bridge mode, WAN and LAN port use the same
IP address. The default IP address is 192.168.11.1.
Note: UC100 can also be connected through WiFi.
The default SSID of the device is "domain_ [last 6 digits of
MAC address] “ without password.
WiFi
FXS
LAN1
WAN
PWR
SIM
SIM
LAN2
LAN0
FXO
RUN
WiFi Antenna
U C 100
D IN STAR
GSM Antenna
WiFi
FXS
LAN1
WAN
PWR
SIM
SIM
LAN2
LAN0
FXO
RUN
WiFi Antenna
U C 100
D IN STAR
W PS
DC12V WAN LAN0 LAN1 LAN2 FXS FXO RST
Power Adapter
WiFi
FXS
LAN1
WAN
PWR
SIM
SIM
LAN2
LAN0
FXO
RUN
U C 100
D IN STAR
Insert (with the chip facing downwards)
Telephone Line
Analog Phone
PSTN
Line
PSTN
W P S
DC12V WAN LAN0 LAN1 LAN2
FXS
FXO
RST