3 Configurations on Web Interface
SBC3000 Session Border Controller
Copyright©2011-2018 Dinstar
29
Multiple prefixes can be set for one manipulation rule.
Delete Suffix
The suffix that will be deleted after it matches a caller/callee number. For example, if the suffix
is set as 123 and the caller number is 8000123, then the caller number will be changed into
8000;
The suffix supports regular expression;
Multiple suffixes can be set for one manipulation rule.
Add Prefix
The prefix added to the caller/callee number. For example, if the prefix is set as 678 and the
caller number is 9000, then the caller number will be changed into 6789000 after the
manipulation rule is matched;
The prefix does not support regular expression;
Add Suffix
The suffix added to the caller/callee number For example, if the suffix is set as 678 and the
caller number is 9000, then the caller number will be changed into 9000678 after the
manipulation rule is matched;
The suffix does not support regular expression;
Condition
The condition supports regular expression.
If a caller/callee number can match one of the rules set in the ‘Condition’ parameter, the original
number will be changed into the one set in the ‘Replaced By’ parameter.
Replaced By
If a caller/callee number can match one of the rules set in the ‘Condition’ parameter, the original
number will be changed into the one set in the ‘Replaced By’ parameter.
The value of the ‘Replaced By’ parameter does not support regular expression.
Note:
During number manipulation, ‘Delete Prefix’ and ‘Delete Suffix’ are carried out first, followed by ‘Add Prefix’
and ‘Add Suffix’. If ‘Condition’ is also set, SBC3000 will match the condition based on the result of the
abovementioned rules.
If a number manipulation rule is used on the
Service
Access Network
page, the
Service
Access SIP Trunk
page or the
Service
Core SIP Trunk
page, it means the caller/callee number will be manipulated before the call
chooses a route;
If a number manipulation rule is used on the
Service
Routing Profiles
page, it means the caller/callee number
will be manipulated after the call has chosen a specific route.
Number Pool
On the
Service
Number Pool
page, you can set a number pool. If the number pool is used on the
Service
Routing Profiles
page, the caller/callee number will be randomly replaced by a number from the pool.
Summary of Contents for SBC3000
Page 3: ......
