3 Configurations on Web Interface
SBC3000 Session Border Controller
Copyright©2011-2018 Dinstar
19
If only ‘Registration’ is enabled and meanwhile the SIP trunk is successfully registered, the status of the SIP trunk
will be ‘True’, otherwise, the status will be ‘False’. If only ‘Keepalive’ is enabled and meanwhile its option message
is successfully responded, the status of the SIP trunk will be ‘True’, otherwise, the status will be ‘False’.
Figure 3-8 Core Trunk Status
Table 3-8 Core Trunk Status
Name
The name of the core SIP trunk. It cannot be changed after the configuration is successfully
applied
Status
The status of the core SIP trunk.
True: the core SIP trunk is connected normally and available;
False: the core SIP trunk is disconnected and unavailable
CPS (Calls Per
Second)
The number of new calls routed by the core SIP trunk every second at current time
Registered
The total number of users that are successfully registered to SBC3000 by the help of the core
SIP trunk and are still in validity period
ASR
The ASR of the core SIP trunk since the device is booted up;
ASR = successful calls/total legal calling attempts
Transcoded
The number of calls that are being transcoded through the core SIP trunk at current time
Current Calls
The number of current calls routed by the core SIP trunk
Total Calls
The total number of legal calls routed by the core SIP trunk since the device is booted up
Note:
As for ASR, if the invite message of a call is successfully responded, we consider the call as a successful/answered
call.
Calls are grouped into inbound calls and outbound calls. Inbound calls go from core network to SBC3000, while
outbound calls are exactly the opposite. Inbound calls and outbound calls have their own statistics of ASR, number
of calls that are being transcoded, number of current calls and number of total calls.
Calls Status
On the
Overview
Calls Status
page, the statuses, durations, caller number and callee number of current calls
are displayed.
Summary of Contents for SBC3000
Page 3: ......
