3 Configurations on Web Interface
SBC300 Session Border Controller
Copyright©2011-2018 Dinstar
64
Figure 3-52 System Log
Log Management
On the
Maintenance
Log Management
page, you can set the log level to filter logs, and can export the logs of
different level.
Figure 3-53 Log Management
Tools
On the
Maintenance
Tools
page, you can use three network utilities including Ping, Traceroute and Nslookup
to diagnose the network, and can capture data packages of the available network ports.
[PING]
Ping
is used to examine whether a network works normally through sending test packets and calculating response
time.
Instructions for using Ping:
1.
Enter the IP address or domain name of a network, a website or a device in the input box of Ping, and then click
Ping
.
2.
If related messages are received, it means the network works normally; otherwise, the network is not connected
or is connected faultily.
[
Traceroute]
Traceroute
is used to determine a route from one IP address to another.
Instruction for using Traceroute:
Step1.
Enter the IP address or domain name of a destination device in the input box of Traceroute, and then click
Traceroute
.
