3 Configurations on Web Interface
SBC300 Session Border Controller
Copyright©2011-2018 Dinstar
17
Figure 3-6 Access Network Status
Table 3-6 Access Network Status
Name
The name of the access network. It cannot be changed after the configuration is
successfully applied
Status
The status of access network is always “true”, which means the access network is normal
and available
CPS
The number of new calls going through the access network every second at current time
Registered
The total number of users that are successfully registered through the access network and
are still in validity period
ASR
The ASR of the access network since the device is booted up;
ASR = successful calls/total legal calling attempts
Transcoding
The number of calls that are being transcoded in the access network at current time
Current Calls
The number of current calls in the access network
Total Calls
The total number of legal calls since the device is booted up
Note:
Calls are grouped into inbound calls and outbound calls. Inbound calls go from terminal users to SBC300, while
outbound calls are exactly the opposite.
Inbound calls and outbound calls have their own statistics of ASR, number of transcoded calls, number of current
calls and number of total calls.
Access Trunk Status
Access SIP Trunk can realize the connection between terminal users and SBC300.
If both ‘Registration’ and ‘Keepalive’ are disabled for the SIP trunk on the
Service
Access SIP Trunk
page, the
status of the SIP trunk will be ‘True’. If both ‘Registration’ and ‘Keepalive’ are enabled, the SIP trunk is successfully
registered and meanwhile the option message for ‘Keepalive’ is successfully responded, the status of the SIP trunk
will be ‘True’, otherwise, the status will be ‘False’.
If only ‘Registration’ is enabled and meanwhile the SIP trunk is successfully registered, the status of the SIP trunk
will be ‘True’, otherwise, the status will be ‘False’. If only ‘Keepalive’ is enabled and meanwhile its option message
is successfully responded, the status of the SIP trunk will be ‘True’, otherwise, the status will be ‘False’.
