3 Configurations on Web Interface
SBC300 Session Border Controller
Copyright©2011-2018 Dinstar
58
Figure 3-41 Add Static Route
Table 3-32 Static Route
Priority
The priority of the static route. The smaller digit, the higher priority
Description
The description of the static route
IP Destination IP
The destination IP address of the static route
Mask
The netmask of the static route, such as 255.255.255.0
Interface
The source interface of the static route, such as GE0, GE1,GE2 and GE3
Nexthop
The next hop address, namely the router address passed by the packets before they reach the
destination address
User Manager
On the
System
User Manager
Password
page, you can modify administrator’s password for logging in the
SBC300 device. Factory defaults for administrator’s username and password are ‘
admin
’ and ‘
admin@123#
’ which
are also used to log in SSH.
Password
Figure 3-42 Modify Password
