DWG2000-8G User Manual
_______________________________________________________________________________
Dinstar Technologies Co., Ltd.
44
4.11.3 SIP Configuration
Figure 4-11-3 SIP Configuration
SIP
Configuration
Used for Configuring VoIP channel, add SIP Registry Platform and local SIP
Channel, and configure SIP protocol and other related information
SIP Server
Address
Used for configure SIP server address and Channel, the address can be IP
Address, also can be a domain name (DNS should to be able to resolution),
the details please advisory the service provider
SIP Proxy Port
Port default setting is 5060. For details, please consult the service provider
Outbound Proxy
Address
Outbound proxy, it mainly used in firewall / NAT environment. That make the
signaling and media streams are able to penetrate the firewall, the details
please advisory the service provider
Outbound Proxy
Port
Outbound proxy port number, the details please advisory the service provider
Use Random
Port
Set the local monitor SIP port(fixed or random), random is every time you
start the device will random Select a free SIP port Monitor
Is Register
Default set yes, if you want the device can make a call without register, set
No, Also enable the "Allow Outgoing Calls without Registration" and "Allow
Incoming Calls without Registration" function
Register Interval
Means how often the equipment will register once to the SIP server/proxy
T1
Used to define the SIP protocol T1 timer value, default is 500ms
T2
Used to defines the SIP protocol timer values, default value is 4000ms
T3
Used to define the T2 timer value in SIP protocol, the default is 5000ms
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
