DWG2000-8G User Manual
_______________________________________________________________________________
Dinstar Technologies Co., Ltd.
27
4.7 Routing Configuration
4.7.1 Routing Parameter
Figure 4-7-1 Routing Parameter
Table 4-7-1Description of Routing Parameter
Tel->IP Parameter
Globle parameters, it will take effect while number manipulation configured
Route calls after
manipulation
The parameters indicate that the gateway will select Tel->IP routes after
number manipulation completed
Route calls before
manipulation
The parameters indicate that the gateway will select Tel->IP routes before
number manipulation completed
4.7.2 Tel->IP Routing
Figure 4-7-2 Tel to IP Routing
Table 4-7-2 Description of Tel to IP Routing
Tel -> IP Routing
This item uses to configure incoming call routes which can be used for recieve the
calls from the GSM.
Index
It uniquely identifies a route. Its value is assigned globally, ranging from 0 to 31.
Description
It describes the route for the ease of identification. Its value is character string
Source Port
It specifies the Port or Port Group which will receive the calls from PLMN
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
