DWG2000-1G User Manual
56
Copyright @ 2011-2015 Dinstar
Step 8.
Apply configuration changes.
9.2.2
Configuration Procedures on DWG2000-1G
Step 1.
Log into the Web Management System of DWG2000-1G.
Step 2.
On the navigation tree on the right, click System Configuration
SIP Parameter, and the
following interface will be displayed.
SIP Server Address (the IP address of the Elastix Server,
‘
172.16.33.58
’
in this example)
SIP Server Port (5060 in this example)
Is Register (Select YES, as it is SIP Registration instead of IP Trunking)
Step 3.
Click Save on the bottom of the interface.
Step 4.
On the navigation tree on the right, click System Configuration
Port Parameter, and
configure authentication information on the interface.
SIP User ID: the username set in Step 3 of the configuration on Elastix Server.
Authenticate ID: Same as SIP User ID by default
Summary of Contents for DWG2000-1G
Page 6: ......