Dinstar DWG2000-1G, User Manual, Page: 43 / 64

DWG2000-1G User Manual
37
Copyright @ 2011-2015 Dinstar
Parameter Explanation
Index You can choose any one from 0
–
31, but an index cannot be used repeatedly.
Description You can enter any description you want.
Source Prefix The prefix of the source number
Source The source IP in the Operation

IP
–
Tel Operation interface
Destination
Prefix
The prefix of the destination number
Stripped Digits
from Left
The number of digits which are lessened from the left of the destination
number
Stripped Digits
from Right
The number of digits which are lessened from the right of the destination
number
Prefix to Add The prefix added to the destination number after its digits are lessened.
Suffix to Add The suffix added to the destination number after its digits are lessened
Number of Digits
to Leave from
Right
The number of the retained digits which. are counted from the right of the
destination number
Note: You can only configure some of the parameters according to your needs.
Parameters (Source Prefix, Source IP, Source IP Trunk and Destination Prefix) are the triggering
conditions for number manipulation, while the remaining parameters (Stripped Digits from Left or
From Right , Prefix/Suffix to Add and Number of Digits to Leave from Right) are the rules to change
numbers.
Step 3. Click OK
Step 4. If you need to delete or modify the configuration, click the on the left, and then click Delete
or Modify.