Dinolift DINO 105TL, Operating Instructions Manual, Page: 55 / 82

DINO 105TL
55
19.2 DAILY INSPECTION (START-UP INSPECTION)
To be always performed at a new worksite and in the beginning of every
working day.
The inspection is performed by the user.
In the inspection attention shall be paid to the following issues:
– establish the load-bearing capacity of the ground (see points "Start-up" and "Load-
bearing capacity of the base")
– verify the standing stability of the lift
– control the due operation of the position indicator
– test the operation of the emergency stop system both from the platform and the chassis
control centre
– test operation of the emergency descent system
– test the alarm signal
– check the signal light for the outrigger limit-switches (H3)
– check the operation and cleanliness of the lights and reflectors
– check the condition of the operating controls and test all the work movements
– check the condition of the access routes, the platform gate and the handrails
– check the operation of the limit switches, which block the movements of the boom (see
point “Operation of the safety devices when controlled from the chassis control centre”).
– check the limit switch, which prevents the operation of the outriggers (see point
“Operation of the safety devices when controlled from the chassis control centre").
– check the hydraulic system for tightness
– test the brakes
– check the structures visually
– observe the location of nearby power lines (see point "General safety regulations")