Dinolift DINO 105TL, Operating Instructions Manual, Page: 36 / 82

DINO 105TL
36
INSTRUCTIONS FOR SERVICE AND MAINTENANCE
18 GENERAL SERVICE INSTRUCTIONS
– carry out the servicing and inspection of the lift in accordance with the instructions
– when it comes to more demanding repair works turn to a specialist or contact the
distributor or the manufacturer of the lift
– do not modify the lift without written consent from the manufacturer
– any such faults which may affect the operational safety of the unit must be repaired
before the lift is next used
– do not let oil spill on the ground
– keep the lift clean, especially the platform
– clean up the lift before service and inspection
– use genuine spare parts
– support the platform, boom system and support outriggers in a position in which the
load does not rest on the structure under repair or cause any other danger (e.g.
transport position or use of supporting structures)
18.1 LIFTING
– the device may be lifted with two slings, each with a load-carrying capacity of at least
1,000 kg, by the four lifting lugs (see picture)
Be careful not to damage the device during the lifting!
Only use lifting gear that are explicitly intended for this purpose