21
Installation Tip:
Unfasten fabric side panels and
reach behind restraint cover for
easy access to belt path. (Fig. 3)
5. Confirm LATCH belt lays flat
and is not twisted. Attach
each connector to the
LATCH anchor closest to
each side of the restraint.
(Fig. 4)
LATCH connector will ‘click’
to confirm attachment to
anchor.
6. Position connector mecha-
nisms behind the restraint
(Fig. 5A).
7. Pull loose end of LATCH
strap through back of
restraint (Fig. 5 and Fig. 6).
Place your non-dominant
hand inside restraint at the
very back and push down.
Pull strap upwards with
your dominant hand until
tight. (Fig. 6)
CHECK LIST:
Confirm restraint is
properly positioned.
Confirm LATCH belt is tight
and that connections to
approved LATCH anchors are secure.
Confirm restraint is stable (see page 25).
Removal:
Press red release button on back of each LATCH connector.
Disconnect top tether. Properly store LATCH belt and top
tether.
3
4
5
6
A
