15
2
3
4
5. Route LATCH belt through
rear-facing belt path.
Confirm LATCH belt lays flat
and is not twisted. Attach
each connector to the
LATCH anchor closest to
each side of the restraint.
(Figs. 2 & 3)
LATCH connector will ‘click’
to confirm attachment to
anchor.
6. Push restraint down firmly
into vehicle seat while
tightening LATCH belt.
(Fig. 4)
CHECK LIST:
Confirm restraint is properly positioned.
Confirm LATCH belt is tight and that connections to
approved LATCH anchors are secure.
Confirm restraint installation is stable (see page 25).
Stability of installation can be improved by using top
tether (see page 30 for tether instructions).
Removal:
• Press red release button on each LATCH connector to
release it.
• Disconnect top tether if in use.
• Properly store LATCH belt and top tether.
