DiniTech NRGkick 16A, Instruction Manual

Page: 10 / 76

8 Ver.: 1810-11
EN
•
LED 24A (NRGkick 32A, 32A light) or LED 13A (NRGkick 16A, 16A light) are permanently illuminated,
all other LEDs are flashing
Indicates an irregularity on the check of the internal switching contact. Disconnect the NRGkick from the
vehicle and the grid. Then reconnect the NRGkick to the grid. If the error persists please contact your
dealer.
•
LED 32A (NRGkick 32A, 32A light) or LED 16A (NRGkick 16A, 16A light) are permanently illuminated,
all other LEDs are flashing
Indicates an irregularity of the residual current protection mechanism. A too high residual current created
by the electric vehicle has triggered the residual current protection mechanism of the NRGkick. This is
caused by an error of the vehicle or by a defect of the cable from the electric vehicle leading to the NRGkick.
Disconnect the NRGkick from the vehicle and the grid and check, possibly with the involvement of a skilled
electrician or a workshop, if one of the causes described above has occurred. Then reconnect the NRGkick
to the grid. If the error persists please contact your dealer.
•
No LED is illuminated
Make sure that the electrical installation is connected correctly. The NRGkick needs a connection to phase
1 and the neutral conductor in order to power the internal electronics.
5.8 Integrated Functions
•
Charging electronics in conformity with EN 62752 (control pilot circuit according to IEC/TS 62763)
•
Residual current protection for direct as well as for alternating residual current (continual
surveillance
in the “vehicle charging” mode ).
•
Energy meter for voltage, current, power and energy measurement
*
•
Bluetooth Low Energy (BLE) for the data exchange with smartphones
*
*not included in the “light” product option
6. Adapter Plugs
Only use adapters and accessories supplied with the charging unit or those approved by DiniTech GmbH.
Take note of the maximum current that can be set for the specific adapters! The maximum current is
indicated on the label on the adapter. In addition, there are current limit marks printed on the left of the
NRGkick housing that inform you of the maximum charging current that can be set for the requirements
of the different grid connectors.