TPW
7
Introduction
USER_MAN_ENG_TPWE-FORCE
INTRODUCTION
This manual contains all the instructions for the use of the machine and the necessary knowledge for its correct
use. While thanking you for buying our truck we would like to draw your attention to some important aspects of this
manual:
•
This booklet gives useful indications for the correct use and maintenance of the fork lift truck to which it refers;
it is, therefore, essential to pay great attention to all the paragraphs that illustrate the simplest and safest way of
using the truck;
•
This booklet must be considered an integral part of the truck and should be included at the moment of sale.
•
No part of this publication may be reproduced without the written authorisation of the manufacturer.
•
All the information contained in this booklet is based on the data available at the time of printing; the manufacturer
reserves the right to modify its products at any time, without notice and without liability.
It is therefore advisable to regularly check for any changes.
Safety messages
“Self-propelled forklift” means any vehicle equipped with wheels (except those circulating on rails) designed to
transport, tow, push, lift, stack or place any type of load on a rack and driven by an operator moving along with the
forklift or on board the same, on a seat or a specific platform.
The TPW E-FORCE forklift is a type of self-propelled industrial vehicle called “electric pallet truck”, a non-stacker
forklift equipped with forks, driven by an operator on foot, whose purpose is to lift a load off the ground on a
standardized pallet or container so it can be transported.
THE PERSONNEL APPOINTED BY THE COMPANY OWNING THE FORKLIFT IS OBLIGED TO FOLLOW
THE GENERAL PROVISIONS OF THIS DOCUMENT FOR THE PURPOSES OF COMPLIANCE WITH SAFETY
REGULATIONS.
The operator has the obligation to prevent the use of the forklift by untrained personnel and must take away
the starting keys when leaving the forklift, in order to prevent its use by others. It is advisable to provide only
authorized operators with keys.
The Employer, through the Supervisors of its Company, must ensure compliance with these provisions.
The Supervisors of the Company must comply with the following provisions:
•
Ensure that the operators have good psychophysical characteristics.
•
Make sure that the operators know how to use of the forklift and have read this user manual.
The operator and the maintenance technician must perform routine maintenance as indicated in this manual in
the dedicated chapter. The operator and the person in charge of maintenance have the obligation to ask the
Supervisor the intervention of the manufacturer technical assistance for the extraordinary maintenance indicated in
this manual.
The operator is obliged not to use the forklift while any defect is present.
THE FORKLIFT USE AND MAINTENANCE MANUAL MUST ALWAYS BE AVAILABLE TO THE OPERATOR
Summary of Contents for TPW E-FORCE
