Dini Argeo MCWN Series, User & Installation Instructions Manual

Page: 48 / 52

MCWN
48
Troubleshooting cases
USER_MAN_ENG_MCWN
MESSAGE DESCRIPTION SOLUTION
UNSTAB
The weight is unstable
Check the weighing filter.
If the support surface is subjected to vibrations from
machinery or moving vehicles, move the scale onto
another surface and try again.
low
The net or gross weight is
negative or insufficient for
printing
Add weight and try again.
under
Underload
Load the scale and restore a valid weight condition.
If the problem persists, contact customer service.
over
Overload
Unload the scale and restore a valid weight
condition. If the problem persists, contact customer
service.
no.0.unS
The scale was not unloaded
after the last print out Completely unload the scale, making sure
lights up. Load the weight and try again.
err.mot
The weight is unstable
Wait for stability (the indicator appears) and try
again.
Error
In piece counting mode, the
weight is insufficient for proper
sampling.
Add more pieces and try again.
Error messages