DOSAGE
55
6.19
Error messages
Displayed error message
Type of error
What to do
The scale weight is out of the
zero tolerance weight value
before starting the dosage
To check the zero tolerance
weight in the technical
setup
, Enlarge this value
or unloaded the scale more
The dosage procedure has
passed the maximum dosage
time or dosage lock triggering
time elapsed
Prsess the
button,
the dosage procedure will
continue
to
excute the
present step.
The scale weight is too much,
if the formula starts, the total
loaded weight will be higher
than the capacity.
Unloaded the scale manually
The formula target of single
activity is not correct or the
total weight is not set when
the formula total mode is
selected
Set the correct formula target
of every inserted activity or
set the correct total target in
total mode
The present weight is over
the selected formula preset
maximum tare value on
dosage start
To
check
the
selected
formula maximum tare in the
database management and
change the maximum tare
value or unload the scale
until the weight is lower than
the formula maximum tare