DFWLKI3GD
4 di 9
All the peripheral units (for instance printers, converters, etc.), which are not marked ATEX, should be installed
only in a zone which is not ATEX classified.
Be very careful when using the instrument; any sparks could cause an explosion.
The DFTL remote control IS NOT ATEX3GD certified therefore it can not be used with the indicator.
Avoid direct sunlight.
If the indicator is powered through the BP6ATEX3GD battery, it must not be powered through another voltage
because the battery must not be recharged in the hazardous zone.
Warning:
- Read carefully this document and apply the his technical specifications.
- This manual has been made as carefully and exactly as possible; in any case, your suggestions are always welcome.
2. DESCRIPTION of the SYSTEM
The "DFWLKI3GD”, “ATEX3GD" version, electronic weighing terminal is device for hazardous areas having presence of
gas, designed and made according to the ATEX 94/9/CE directive, group II category 3GD according to the EN60079-0,
EN60079-15, EN61241-0 and EN61241-1 norms with the “limited breathing” protection mode (Ex and nR) for the gas and
with the limitation for the maximum superficial temperature of the case (tD and IP) for the dust.
