22
7.2 High-speed pulse input port as large screen output port
If any parameter of 1
ᦇ
large screen output content rdp1 and 2
ා
large screen
output content rdp2 under f37 parameter of f parameter is not 0, the high-speed
pulse port is switched to the large screen output port, and the original high-speed
pulse input or ordinary switch input function is disabled.Rdp1 and rdp2 can be
set as follows:
serial
number
parameter show contents
serial
number
parameter
show contents
1
001
Variable P01
6
100
1. Gross weight
2
……
……
7
101
1. Net weight
3
090
Variable
P90,2# Gross
Weight
8
102
1# tare weight
4
091
Variable
P91,2# net
weight
9
111
Control stepping motor
5
092
Variable
P92,2# tare
weight
10
112
As a common output port
(only for model A8KT)
Table 7.2 Parameters and Contents of Large Screen Output Variables
The output port is a current loop, which can be connected to 1-2 large screens.
When connecting two large screens, you can either use the series connection method
or the parallel connection method. See the wiring method for details.
Section 4.4
.
When using the company's big screens, if two big screens are connected, each big
screen can automatically identify its corresponding display variables (see the
instruction manual for the setting of the serial number of the big screen), so
as to realize the functions of displaying 1# variable on the 1# big screen and
2# variable on the 2# big screen, such as one gross weight and one net weight.
7.3 High-speed pulse input port shall be a common input port.
Without switching to the function of large-screen output port, the high-speed
pulse port can be used as a common input port IN11 without any settings. Because
the two signal input terminals (ADJ,SGN) inside the high-speed pulse port are
suspended, the state of the input port after power-on is random. Just press
After the correct external input is connected, the status is normally available.
7.4 Modify the login password
And the passwords of users and administrators can be modified, while the passwords of
manufacturers are dynamic and cannot be modified. As long as you log in for the second time
with the correct password, you can enter the password modification interface. The specific steps
are as follows: