8
3
View and modify control P
parameters
×
√
√
√
4
View and modify f parameters
×
√
√
√
5
View the second display
×
√
√
√
6
Weighing calibration
×
√
√
√
7
Start and stop process
×
√
√
√
8
Initialize the instrument
×
√
√
√
9
Set timing shutdown
×
×
√
√
10
Set input and output ports
×
×
√
√
11
Consistency calibration
×
×
×
√
Table 3.5 comparison of item operation and password
Note 1: √ indicates the operation items allowed under this level of password
login,×Indicates an operation item that is not allowed
Note 2: some items are realized by f parameter, and the corresponding
parameters can only be displayed after logging in the password of this level
Note 3: if the highest bit of f parameter F22 is set to 0 (the factory default
value is 1), if there is no login status, the user (user-1) level permission will
be obtained automatically, that is, if there is no login in the above table, it
will be marked in orange×Can also be operated on
5.4 Operation steps of password login
The specific operation steps of password login are as follows:
Key
Lower
display
Upper
display
meaning
【
Fxx
】
[
,,
F00
] [
pp -----
]
In the weighing display state, press and hold
the [FXX] key, and the lower row will
flash.If you are already logged in, the lower
row displays [F01].If it is necessary to
switch the login level, you can press the ↓
key to select parameter F00.If you input the
current password again, you can enter the
password modification function. See section
7.5 for details
[input]
[
,,
F00
] [
pp -----
] The top row flashes the rightmost digit
Directio
n key
[
,,
F00
] [
pp ----1
]
Enter the corresponding password, factory
default value: user password [--- 1],
administrator password [59565], factory
password, dynamic uncertainty
