OPERATOR’S MANUAL
with Maintenance Information
Function Tests
20
⊙
Result: The horn should sound.
Test Function Enable and Up/Down
Functions
21 Do not hold the function enable switch on
the control handle.
22 Slowly move the control handle in the
direction indicated by the blue arrow, then
in the direction indicated by the yellow
arrow.
⊙
Result: No functions should operate.
23 Press the lift function select button.
24 Press and hold the function enable switch
on the control handle.
25 Slowly move the control handle in the
direction indicated by the blue arrow.
⊙
Result: The platform should raise.
26 Release the control handle.
⊙
Result: The platform should stop raising.
27 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the yellow arrow.
⊙
Result: The platform should lower. The
descent alarm should sound while the
platform is lowering.
Test the Steering
Note: When performing the steer and drive
function tests, stand in the platform facing the
steer end of the machine.
28 Press the drive function select switch.
29 Press and hold the function enable switch
on the control handle.
30 Depress the thumb rocker switch on top of
the control handle in the direction identified
by the blue left arrow on the control panel.
⊙
Result: The steer wheels should turn in the
direction that the blue left arrow points on
the control panel.
31 Depress the thumb rocker switch in the
direction identified by the white right arrow
on the control panel.
⊙
Result: The steer wheels should turn in the
direction that the white right arrow points
on the control panel.
Test Drive and Braking
32 Press and hold the function enable switch
on the control handle.
33 Slowly move the control handle in the
direction indicated by the blue up arrow on
the control panel until the machine begins
to move, then return the handle to the
center position.
⊙
Result: The machine should move in the
direction that the blue up arrow points on
the control panel, then come to an abrupt
stop.
34 Press and hold the function enable switch
on the control handle.
35 Slowly move the control handle in the
direction indicated by the yellow down
arrow on the control panel until the
machine begins to move, then return the
handle to the center position.
⊙
Result: The machine should move in the
direction that the yellow down arrow points
on the control panel, then come to an
abrupt stop.
Note: The brakes must be able to hold the
machine on any slope it is able to climb.
Test Limited Drive Speed
36 Press the lift function enable switch. Raise
the platform approximately 1.3 m from the
ground.
37 Press and hold the function enable switch
on the control handle.
38 Slowly move the control handle to the full
Summary of Contents for JCPT0607DCS
Page 3: ......
Page 5: ......
Page 15: ...OPERATOR S MANUAL with Maintenance Information Decals 10 ...