Dinex DuraTherm 2011208 Operating & Maintenance Manual Download Page 10

DuraTherm

10

are shipped to Customer. The warranty period 
for any Warranted Product or part furnished to 
correct a warranty failure will be the unexpired 
term of the warranty applicable to the repaired 
or replaced Warranted Product .

REMEDIES

If Customer promptly notifies Dinex of 
Customer’s warranty claim and makes the 
Warranted Product available for service, Dinex 
will, at its option, either repair or replace (with 
new or exchange replacement parts) the non-
conforming Warranted Product or parts of the 
Warranted Product. With respect to Dinex’s 
licensed software, Dinex will, at its option, 
either correct the non-conformity or replace 
the applicable licensed software. Warranty 
service will be performed without charge from 
8:00 a.m. to 5:00 p.m . E S T, Monday - Friday, 
excluding Dinex holidays, and outside those 
hours at Dinex’s then prevailing service rates 
and subject to the availability of personnel. 
With respect to Dinex’s warranty for the 
services it provides to Customer, Customer’s 
exclusive remedy shall be the re-performance 
of the services by Dinex. The foregoing 
remedies are Customer’s exclusive remedies 
and Dinex’s sole liability for warranty claims 
under this warranty statement. This exclusive 
remedy shall not have failed of its essential 
purpose (as that term is used in the Uniform 
Commercial Code) as long as Dinex remains 
willing to repair or replace defective Warranted 
Products within a commercially reasonable 
time after being notified of Customer’s warranty 
claim.

LIMITATIONS

THESE WARRANTIES ARE EXCLUSIVE AND IN 
LIEU OF ALL OTHER WARRANTIES, WHETHER 
WRITTEN, ORAL, EXPRESSED, IMPLIED OR 
STATUTORY. EXCEPT AS PROVIDED HEREIN, 
NO EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES OF MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE, 
QUIET ENJOYMENT, SYSTEM INTEGRATION 
AND DATA ACCURACY, WILL APPLY. THERE 
ARE NO WARRANTIES THAT EXTEND BEYOND 
THOSE DESCRIBED IN THIS DOCUMENT 
AND NO PRIOR STATEMENTS BY ANY OF 
DINEX’S REPRESENTATIVES SHALL MODIFY 
OR EXPAND THESE WARRANTIES. DINEX AND 
DINEX’S AFFILIATES AND REPRESENTATIVES 
SHALL HAVE NO LIABILITY TO CUSTOMER 
FOR (1) ANY SPECIAL, PUNITIVE, INCIDENTAL, 
INDIRECT OR CONSEQUENTIAL DAMAGES 
ARISING OUT OF OR IN CONNECTION WITH 
THE WARRANTED PRODUCTS, REGARDLESS 
OF WHETHER SUCH LIABILITY SHALL BE 
CLAIMED IN CONTRACT, TORT, EQUITY 
OR OTHERWISE, (2) ANY ASSISTANCE NOT 
REQUIRED UNDER DINEX’S QUOTATION 
OR (3) ANYTHING OCCURRING AFTER THE 
WARRANTY PERIOD ENDS.

DINEX’S STANDARD WARRANTIES ONLY 
APPLY TO END-USER-PURCHASERS 
LOCATED IN THE UNITED STATES AND 
CANADA. ANY SALE TO END-USER-
PURCHASERS OUTSIDE THE UNITED 
STATES AND CANADA WILL BE SUBJECT 
TO COMMERCIAL TERMS SPECIFICALLY 
AGREED BY DINEX AND THE END-USER 
PURCHASER. DINEX MAKES NO WARRANTY, 
EXPRESS OR IMPLIED, TO END-USER-
PURCHASERS OUTSIDE THE UNITED 
STATES OR CANADA UNLESS OTHERWISE 
EXPRESSLY AGREED IN WRITING.

These warranties do not apply to, and Dinex 
shall not have any obligation to Customer 
hereunder with respect to, any warranty claim 
resulting from or arising out of: (i) normal wear 
and tear; (ii) damage caused by shipping or 
accident; (iii) damage caused by improper 
installation, repair or alteration not performed 
by Dinex; (iv) the use of the Warranted Product 
in combination with any software, tools, 
hardware, equipment, supplies, accessories or 

Summary of Contents for DuraTherm 2011208














Reviews: