7
©
Dinel, s.r.o. FLD-32
7 .
E
lECTriCal
CONNECTiON
BN
GN
WH
The positive pole of the power supply (+U) is connected to the brown wire, the negative (0V)
to the white wire. The output from the sensor is fitted with short-circuit protection. Capacitive
loads and those with low resting resistance (light bulb) are evaluated by the sensor as a short-
circuit.
Note: In case of strong envi-
ronmental electromagnetic
interference, routing of wires
next to high-voltage lines or
when the total distance is
more than 30 m, the use of
a shielded cable is recom-
mended.
connecting the sensor with programming wire (version W)
BN
WH
Cable core
identification:
BN
- brown
GN
- green
WH
- white
connecting the sensor without programming wire (version M)
The setup is made by using green wire (
so-called programming) at version FLD-32N-W-S
or
by touching the
magnetic pen MP-8 at version FLD-32N-M-S
to the sensitive spot on the body
of the sensor. This can be used to setup the upper and lower limits of liquid level, SO modes
(open contact when the level decreases) and SC (closed contact when the level decreases).
8 .
S
ENSOr
SETup
Attachment bands are recommended for applications where frequent removal of the sensor
from the vessel surface is expected.
