Issued by: PM approved by DG Rev.01 date 03/09/18 pag. 2/10
Description
YOUTUNE is a calibration device showing data relative to the main functions performed by Rapid
Bike EVO and RACING module with the purpose to interact in real time and modify the related
parameters within a range of pre-set values, including the possibility to enable/disable them.
Main features
Dimensions 90x45x18 mm
– 3.5x17.7x7.1 in
Weight 100gr
– 0.22 lb
International Protection Marking: IP67.
Communication: CAN-BUS 2.0 - 256Kbps.
Adjustable brightness.
Storable adjustments.
Positioning: handlebar; upper triple clamp; dashboard upper side; front area.
Fastening: double-sided high-resistance Velcro.
Connecti
ons: plug ‘n’ play with Rapid Bike Evo / Racing harness.
READ BEFORE INSTALLATION:
Be sure to update the
firmware
of the Rapid Bike Evo / Racing module with the
latest version available in the Rapid Bike Master software ver. 2.0.6.8 and further
In case one or more My Tuning Bike devices are installed on the bike, proceed with
its firmware upgrade too (refer to the software manual for both procedures).
NOTE:
software advises automatically to proceed with upgrade if it is opened with
bike’s ignition
ON
.
WARNING
To prevent any risk of injury, it is recommended not to take your attention away
from riding while operating with the device.