Setback Settings
Setback is a function that only modifies Timer Mode operation. When Setback is enabled
it overrides any
Heating Off
period to maintain a constant temperature during Heating
Off periods.
This can be used to prevent the room temperature from falling below a minimum value
while there is no demand for heat (
Heating On
).
To activate and setup setback mode:
• Hold the
ADV
and
MENU
buttons for 2 seconds.
• Use the arrow keys to highlight ‘Sb’ and confirm using the
ENTER
key
• Use the arrow keys to select Setback ON or OFF.
• Selecting OFF will return you to the home screen with Setback deactivated.
• If ‘ON’ icon is selected, you will be required to set a Setback temperature.
• Use the arrow keys to select the desired setback temperature. Press
ENTER
to
confirm and return to the home screen. Setback mode will be active
Adaptive Start
Adaptive Start is a predictive function that only modifies Timer Mode operation. This
function models the heating characteristics of the room and uses that information to
pre-heat the room to ensure the target temperature has been reached by the start of
the Heating On period.
For example, with Adaptive Start off, the
Heating On
time is the time that the Heater
will begin to try and achieve the
Target Temperature
. With
Adaptive Start
On, the
Heater will begin to heat the room before the User-defined
Heating On
time so that
30
Summary of Contents for PFH30E
